Compsee Apex III Bedienungsanleitung PDF herunterladen (Seite 29)

Standard Setup

Key Click

This check box enables (checked) or disables (unchecked) audible key clicks from the

terminal. The default value is

on (checked).

Printer Type

This scrolling list selects the attached printer type. The default value is none, indicating

that no printer is attached.

Terminal Setup Using Twin Client Menus

For compatibility with other PowerNet products, the PowerNet Twin Client for Compsee

also supports the standard Twin Client configuration menu system on the terminal. This

menu system is accessed by pressing uppercase

C at the Twin Client main menu below.

Twin Client

Keypress to Continue

The following menu appears.

Edit Menu Options

Edit Mobile Unit IP

Edit Server/Host IPs

Edit Radio Option

Edit License Key

Switch Client Modes

Run Client Emulator

Exit to OS

Use the Up-Arrow and Down-Arrow keys to navigate the menu, and press Enter to select

the highlighted option. Each menu option is described below.

Edit Mobile Unit IP

The IP list contains the terminal IP address, the Subnet Mask and the Router IP address.

Enter the appropriate address. Select

F3 to save and/or F7 to Quit, as shown below.

IP 206.232.71.38

SN 255.255.255.0

RT 206.232.71.1

<F3> Save <F7> Quit

Edit Server/Host IPs

If the host IP address(es) were not pre-configured as described in the Setting the Servers

section of Configuring the Manager, or if you wish to change those settings using the

terminal menus, select this option and enter up to four Host IP addresses as required.

Supported Equipment Manual

•

May, 2006

2-21

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 73 74

Keine Kommentare

Compsee Apex III Bedienungsanleitung Seite 29